A&D GX-102000LS High Capacity Lab Balance, Dual Range with Separate Display, 102 kg x 1 g

The A&D GX-102000LS high-capacity lab balance features a robust design for versatile use, capable of precise measurements with a 102 kg capacity and 1 g readability. Unlike the GX-102000L, which has a swing-arm display, the GX-102000LS offers a separate display stand, allowing the display unit to be installed away from the weighing platform for enhanced flexibility and usability, especially in environments prone to spillage or water exposure. Both models share a similar robust construction and IP65 rating for dust and water resistance. The GX-102000LS is equipped with Impact Shock Detection (ISD) to prevent downtime due to load cell failure. This model also includes Auto Self Calibration (ASC) to ensure ongoing accuracy. The A&D GX-102000LS features a linearity of ±2 g and a typical stabilization time of approximately 1.5 seconds when set to FAST. It has a sensitivity drift of ±6 ppm/°C between 10 to 30 °C (50 to 86 °F) when the automatic self-sensitivity adjustment is off. The accuracy immediately after internal sensitivity adjustment is ±10 g. The operating environment ranges from 5 to 40 °C (41 to 104 °F) with a relative humidity of 85% or less, without condensation. The data memory capacity includes 200 weighing results, 50 sensitivity adjustment/calibration test results with timestamps, 50-unit masses for counting mode, 20 sets of upper and lower limit values for comparator mode, and 20 tare values. The display refresh rate can be set to 5, 10, or 20 times per second. It has communication interfaces of RS-232C (D-Sub 9-pin) and USB (mini-B), and supports applicable calibration weights of 10 kg, 20 kg, 40 kg, 50 kg, 60 kg, 80 kg, 100kg. The device has a net weight of 39.7 lb and an IP65 dust and waterproof rating. It is powered by an AC adapter with an approximate consumption of 30 VA. Standard accessories include a display cover, AC adapter, 6' USB cable, and two– cable clamps.