A&D GX-62000L High Capacity Lab Balance, Dual Range with Swing Arm, 62 kg x 1 g

The A&D GX-62000L high-capacity lab balance features a robust design for versatile use, capable of precise measurements with a 62 kg capacity and 1 g readability. It offers a swing-arm display, allowing for easy adjustments and positioning, making it suitable for both benchtop and floor applications. This model shares a robust construction and is IP65 rated for dust and water resistance. The GX-62000L is equipped with Impact Shock Detection (ISD) to prevent downtime due to load cell failure. This balance requires manual calibration to ensure ongoing accuracy, making it ideal for high-capacity weighing tasks in demanding environments. The A&D GX-62000L features a linearity of ±1 g and a typical stabilization time of approximately 1.5 seconds when set to FAST. It has a sensitivity drift of ±6 ppm/°C between 10 to 30 °C (50 to 86 °F) when the automatic self-sensitivity adjustment is off. The accuracy immediately after internal sensitivity adjustment is ±5 g. The operating environment ranges from 5 to 40 °C (41 to 104 °F) with a relative humidity of 85% or less, without condensation. The data memory capacity includes 200 weighing results, 50 sensitivity adjustment/calibration test results with timestamps, 50-unit masses for counting mode, 20 sets of upper and lower limit values for comparator mode, and 20 tare values. The display refresh rate can be set to 5, 10, or 20 times per second. It has communication interfaces of RS-232C (D-Sub 9-pin) and USB (mini-B), and supports applicable calibration weights of 10 kg, 20 kg, 30 kg, 40 kg, 50 kg, 60 kg. The device has a net weight of 37.5 lb and an IP65 dust and waterproof rating. It is powered by an AC adapter with an approximate consumption of 30 VA. Standard accessories include a display cover, AC adapter, 6' USB cable, and two– cable clamps.